010-151 Supporting Cisco Datacenter Networking Devices Questions and Answers

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

Encapsulates Ethernet frames into Fibre Channel frames, which allows them to run alongside traditional IP traffic.

Increases capital costs due to the difficulty to manage.

Consolidates I/O traffic in the data center.

It allows Ethernet traffic to run over a Fibre Channel infrastructure.

cable tester

wrench set

cable wraps

needle-nose pliers

PCMCIA memory

soldering iron with grounded tip

Use the Cisco UCS Admin.

Use the Cisco UCS Application.

Use the Cisco UCS Assistant.

Use the Cisco UCS Manager.

SFP modules convert the serial electrical signals to serial analog signals and vice versa.

The small form-factor pluggable (SFP) is a compact, hot-pluggable copper module transceiver.

SFP modules offer a simple and effective way to connect a single network device to a wide variety of fiber cable types.

SFP modules can be classified based on the working voltage and size.

FCIP

iFCP

iSCSI

FCoE

first-generation supervisor module

second-generation supervisor module (Sup2)

second-generation supervisor enhanced module (Sup2E)

third-generation supervisor enhanced module (Sup3E)

1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports.

It hosts and runs Cisco Integrated Management Controller (CIMC).

All Ethernet ports can support FCoE.

Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only.

Provides both the LAN and SAN connectivity for all servers within its domain.

UCS Manager and System

UCS Manger and Kernel

CIMC and Kernel

System and Kernel

SATA

SAS

PCle

SCSI

Two

Four

Eight

Sixteen

Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.

Power status LED. Green indicates that the server is in main power mode and can be safely powered off.

Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED.

Disconnect the power cords from the power supplies in your server to completely power off the server.

Only an emergency shutdown can be performed using the power button on the server front panel.

The Cisco UCS C-Series Rack-Mount Server has only one power mode.

M81KR VIC

VIC 1400 Series

VIC 1300 Series

VIC 1200 Series

16

32

48

64

100 Mb/s

1 Gb/s

10 Gb/s

100 Gb/s

Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

Virtual Interface Card for Cisco UCS B420 M3 Blade Servers

mLOM for Cisco UCS B420 M3 Blade Servers

Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

SuperCap module for Cisco UCS B420 M3 Blade Servers

Managed services data center

Colocation data center

Green technology data center

Enterprise data center

EHWIC

PVDM

NIM

VIC

WIC