300-515 Implementing Cisco Service Provider VPN Services (300-515 SPVI) Questions and Answers

Router 1 will accept multicast routes with a route-target of 12:1.

192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.

Router 1 has statically defined thresholds for data MDT.

The MVRF must be configured on each router on the customer and service provider networks.

PIM dense mode with Reverse Path Forwarding

PIM dense mode

PIM sparse mode

Bidirectional PIM

the AS-Override feature

the DN bit with type 3, 5, or 7 LSA

the domain tag for type 2 LSA

sham links to create a super backbone over the service provider network

with import route targets 101:102 and 202:201

with import route targets 201:202 and 401:402

with export route targets 301:202 and 101:102

with export route targets 201:202 and 401:402

Disable 6PVE that provides local IPv6 reachability over MPLS.

Configure 6PE that provides global IPv6 reachability over IPv4 MPLS

Allow PE routers use the MP-iBGP extensions in the IPv6 network configuration to exchange IPv6 reachability information.

Configure 6PE forwarding between 6PE routers based on the IPv6 header

VLAN name

Xconnect group name

EFP subinterface number

pseudowire ID

MTU size

control word usage

Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling.

Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP.

Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS.

Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling.

Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling.