Labour Day - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpm65

143-085 Brocade Certified Fabric Professional Gen 5 Questions and Answers

Questions 4

Refer to the exhibit.

143-085 Question 4

You have installed a Brocade 6510 switch into a fabric with 8 Gbps devices. You begin experiencing bottlenecks on the 8 Gbps ports.

What would you do to correct this problem?

Options:

A.

Configure Ingress Rate Limiting on the 16 Gbps devices.

B.

Configure Target Rate Limiting on the 8 Gbps device ports.

C.

Configure Bottleneck Detection.

D.

Install an additional ISL between switches.

Buy Now
Questions 5

Your application is using an average frame size of 1024 bytes across your long-distance links.

Which two actions will fully saturate the link? (Choose two.)

Options:

A.

Set the port for LD and specify the distance.

B.

Set the port for LD and specify the frame size.

C.

Set the port for LS and specify the frame distance and size.

D.

Set the port for LE and specify the distance and frame size.

Buy Now
Questions 6

A customer wants to connect an ISL between a Brocade DCX 8510 and a Brocade 5300 which are located 20 km apart at 8 Gbps through a DWDM.

Which two changes are required to the ports to enable error correction and communication between the devices? (Choose two.)

Options:

A.

Enable ARB fill words on the Brocade 5300 E_Port.

B.

Enable ARB fill words on the Brocade DCX 8510 E_Port.

C.

Enable FEC on the DCX 8510 E_Port.

D.

Enable FEC on the Brocade 5300 E_Port.

Buy Now
Questions 7

You want to implement trunking and you are using in-flight encryption on a Brocade 6510 switch using 8 Gbps SFPs in your fabric.

What is the maximum number of ports per trunk that is supported?

Options:

A.

2

B.

4

C.

8

D.

16

Buy Now
Questions 8

Exhibit:

143-085 Question 8

In the exhibit, if the master port goes offline, what will occur?

Options:

A.

The slave links will go offline.

B.

Frames on the slave links will be lost.

C.

The trunk group will split into multiple trunk groups.

D.

Frames on the master link will be lost.

Buy Now
Questions 9

Exhibit:

143-085 Question 9

Referring to the exhibit, which two statements are true? (Choose two.)

Options:

A.

Port 2 can be configured as an EX_Port.

B.

With proper configuration, ports 5 and 6 may be connected.

C.

With proper configuration, ports 1 and 2 may be connected.

D.

Port 1 may be configured as an EX_Port.

Buy Now
Questions 10

You are deploying Brocade switches in Access Gateway mode in your environment. Each Access Gateway must provide access to both a Brocade fabric and a third-party fabric. Maximum resiliency and redundancy are required for the connections into each fabric. Individual servers will be connected to one or the other fabric, but never both.

What are three ways to configure the Access Gateway? (Choose three.)

Options:

A.

Use N_Port trunking on the Brocade fabric uplinks

B.

Use N_Port trunking on the third-party fabric

C.

Use port groups to restrict fabric access

D.

Use port mappings to restrict fabric access

E.

Use different domain IDs for the uplink ports

Buy Now
Questions 11

Which two statements are true about QoS zone-based traffic prioritization in a Gen 5 fabric? (Choose two.)

Options:

A.

Disabling QoS is potentially disruptive to traffic on the affected port.

B.

It is enforced on egress ports only.

C.

It is supported on 10 Gbps Fibre Channel ISLs.

D.

It is supported in redirection zones.

Buy Now
Questions 12

You want to monitor traffic between a virtual host and a specified LUN. Additionally, you want to have the switch send an e-mail to the administrator if the transmit bandwidth exceeds a certain threshold.

Which two steps will accomplish this task? (Choose two.)

Options:

A.

Create a bidirectional flow between the host and storage and specify the LUN number.

B.

Create a unidirectional flow between the host and storage and specify the LUN number.

C.

Configure e-mail alerts in Flow Vision.

D.

Configure e-mail alerts in MAPS.

Buy Now
Questions 13

Your FC-to-FC backbone fabric has two operational links to the same edge fabric. The first link is an EX_Port and the second link is a VEX_Port. Your implementation requires that both paths are used to actively carry traffic.

Which statement describes how to enable both links to simultaneously carry traffic?

Options:

A.

The link on the VEX_Port requires the Advanced Extension license.

B.

The link cost on the VEX_Port needs to be lower than the EX_Port link cost.

C.

The link cost on the VEX_Port needs to be equal to the EX_Port link cost.

D.

The link cost on the VEX_Port needs to be higher than the EX_Port link cost.

Buy Now
Exam Code: 143-085
Exam Name: Brocade Certified Fabric Professional Gen 5
Last Update: Apr 30, 2024
Questions: 91

PDF + Testing Engine

$56  $159.99

Testing Engine

$42  $119.99
buy now 143-085 testing engine

PDF (Q&A)

$35  $99.99
buy now 143-085 pdf
dumpsmate guaranteed to pass
24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 07 May 2024