VMware 5V0-22.23 Exam Dumps - Actual Questions Answers

To achieve the best performance for the database virtual machines and tolerate two host failures in a vSAN OSA cluster, the administrator must use RAID-1 as the RAID configuration in the storage policy. RAID-1 is a mirroring technique that creates multiple replicas of each object across different hosts. RAID-1 provides the best performance among the available RAID configurations, as it does not involve any parity calculations or stripe splitting. To tolerate two host failures, the administrator must set the Failures to Tolerate (FTT) policy to 2, which means that each object will have three replicas. The other options are not correct. RAID-5 and RAID-6 are erasure coding techniques that split each object into data segments and parity segments across different hosts. RAID-5 can tolerate one host failure, while RAID-6 can tolerate two host failures. However, both RAID-5 and RAID-6 have lower performance than RAID-1, as they involve more complex calculations and network traffic. RAID-0 is a striping technique that splits each object into multiple stripes across different hosts. RAID-0 does not provide any data redundancy or fault tolerance, and therefore cannot tolerate any host failure. References: RAID Configurations, FTT, and Host Requirements; RAID 5 or RAID 6 Design Considerations

An all-flash vSAN ESA cluster with four nodes can satisfy the storage policies that require FTT=2 (RAID-1 Mirroring) or FTT=2 (RAID-6 Erasure Coding). These policies mean that the cluster can tolerate two host failures while maintaining data availability and redundancy. RAID-1 Mirroring creates three replicas of each object across different hosts, while RAID-6 Erasure Coding splits each object into four data segments and two parity segments across different hosts. Both policies require at least four hosts in the cluster to meet the FTT=2 requirement. The other options are not correct. An all-flash vSAN ESA cluster with four nodes cannot satisfy the storage policies that require FTT=3 (RAID-1 Mirroring) or FTT=1 (RAID-5 Erasure Coding). These policies mean that the cluster can tolerate three or one host failure respectively, but they require more or less hosts than four to do so. RAID-1 Mirroring with FTT=3 requires at least six hosts in the cluster to create four replicas of each object, while RAID-5 Erasure Coding with FTT=1 requires at least three hosts in the cluster to split each object into two data segments and one parity segment. References: vSAN Express Storage Architecture; RAID Configurations, FTT, and Host Requirements

To protect a virtual machine against a disk or disk group failure, the storage policy must have a failure tolerance method (FTM) of RAID-1 or RAID-6 and a failure to tolerate (FTT) value of at least 1. RAID-1 mirrors the data across multiple disk groups, while RAID-6 uses erasure coding to stripe the data and parity information across multiple disk groups. RAID-5 is not suitable for this scenario, as it can only tolerate one disk failure per stripe. FTT 2 or 3 would require more disk groups than available in the cluster. Therefore, the correct options are C and E. References: 1, page 8; 2, section 3.1