After modifying the "networking mode", the VP98 series MCU requires a server restart to take effect.
Response messages are used in response to request messages that indicate the success or failure status of the call. The different types of response states are distinguished by a status code that contains
a three-digit integer, the first bit of which defines the response type, and the other two digits for further detailed description of the response.
The MCU VP9630-8 has a processing capacity of 8-way 1080P30 full adaptation, which can be connected to () channel 1080P60 fully adaptable, and can also be connected to () channel 720P fully
adapted to the venue.
On the CloudRSE web interface, data recovery is possible by importing a configuration file or restoring a factory configuration operation(s).
The product type selected when upgrading the codec of Huawei TP Series Zhizhen products is ().
After a call set meeting is successfully held, information about the meeting will be available in the SMC's meeting list. ()
() Does not belong to the three elements of video conferencing multimedia business.
() The message indicates that the request cannot be implemented on any SIP server.
Regarding the configuration of Touch access to the CloudLink terminal, the following description is correct? ( )
When you create a normal user on SMC3.0 , you must bind a soft terminal to the user.
The maximum number of hops specifies the maximum number of routes for a given IP traffic, with fewer routes in a meeting and greater latency. ()
By logging in to the SMC3.0 admin admin as a conference administrator , you can add an MCU. ()
The following is the () that belongs to the Framework Agreement on Video Systems
TE50 can connect the camera through the COM1 port or COM2 port to control the camera to move up, down, left and right. ()
T1, a high-definition terminal that supports a built-in MCU, convenes a 3-party meeting, with T1 and T2 establishing a peer-to-peer conference before T1 calls T3 After T3 joins the meeting, the original
conference resolution of T1 and T2 may be reduced. ()
When a meeting operation is performed on SMC3.0, the () operation takes effect for the entire meeting and not for a single venue.
Regarding CloudMCU multi-stream conferencing, the following description is incorrect?().
Regarding the C1oudRSE multipoint recording feature, the following description is incorrect?().
In the Client/Server model, the primary function of request proxy server is to decide where to send signaling messages.
What are the following characteristics of small business applications that are video conferencing systems? ( )
Regarding the addition of mcUs to the web interface of SMC3.0, is the following description correct? ( )
The parameters configured by the configuration template in SMC2.0 are locked by default and cannot be modified by the user ().
( ) The device is responsible for sending the broadcast venue screen to other venues.
Regarding the SMC3.0 Backup Service Area, is the following description correct?
When signaling encryption is used, the video packet of the conference is intercepted on the network, and the video data of the conference cannot be played without the key ()
When SHC2.0 adds TE Series endpoints in a manageable manner, the Username and Password and Terminal () in the authentication information. The user's user name and password are consistent.
VP96 series MCU fully adapted ports can be converted between fully adapted ports of different resolutions, and the port conversion relationship SD: 720p30fps: 1080P30fps: 1080p60fps equals ().
The 192.720i 60 is an intermediate way to balance the smoothness of 60 frames with the relatively low transmission load of 30 frames.
After IdealHub joins the conference, the remote venue cannot hear the sound of the local venue, what is the error in the following troubleshooting methods? ()
What are the advantages of Huawei's video system compared to video chat software? ()
RSE6500 supports hot-spot videos and their sorting, hot-spot videos will be scrolled in the homepage hot-spot area, highlighting key and highlight videos, convenient for users to quickly view.
() The device may provide a unified address book service for video conferencing systems.
Before the meeting, you need to routinely check the status of the terminal input source, which includes ( ).
For a rejection response to a registration request sent by GK to the terminal, the signaling sent is ( ).
During a peer-to-peer call under different GKs, LRQ uses GK to route prefixes to the neighbor GK to query the information of the called node. ()
The INVITE transaction consists of a three-way handshake, in which the client sends INVITE, the server sends a response, and the client sends an ACK ()
Conferencing users created on SMC3.0 can only belong to an organization, not to a region. ( )
In the 86XX series MCU clipboard, the gusset responsible for the system's AV signal stream processing is ().
For endpoints within the same subnet, Idealub can use IP directly for point-to-point calls.
McUs are registered with H.323 and need to make a request to Gk when calling a terminal using a number. ()
Regarding the gallery view in a multi-stream meeting, the following description error is ?().
When 2 MCUs are cascaded, a meeting is scheduled, and the upper and lower MCUs join the meeting as a virtual venue. ()
After the meeting is recorded, the system automatically transcodes the live streaming resources when there is room for them, so that the resources of the RSE6500 are fully utilized, a process known as this
()?
Among the following end products, there are () that belong to the integrated design (integrated microphone, camera, codec, etc.).
DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.
TESTED 28 Apr 2024
