Labour Day - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpm65

H35-210_V2.5 HCIA-Access V2.5 Exam Questions and Answers

Questions 4

Regarding EPON, which of the following descriptions is incorrect?

Options:

A.

The EPON standard is one of many TDM-PON standards and has the basic characteristics of a TDM-PON network: a tree topology network is composed of OLT, ONU and ODN (Optical Distribution Network).

B.

In the logical topology, the EPON protocol establishes a logical link for the OLT to each ONU, and the leading byte of the Ethernet data frame carries the logical link identity, that is, LLID (Logical Link Identity).

C.

The downstream data stream from the OLT to the ONU is encapsulated as an Ethernet message, and the corresponding LLID is attached and sent in the tree PON network. The optical splitter in the ODN broadcasts the data stream to each branch, and all ONUs can receive the downlink Ethernet data frame, and selectively receive their own data according to the LLID.

D.

In the upstream direction from the ONU to the OLT, each ONU uses the broadcast mode to share the upstream bandwidth.

Buy Now
Questions 5

Is the following description correct? ADSL2+ is an extension of ADSL technology, supporting a downlink rate of up to 24Mbit/s and an uplink rate of 2.5Mbit/s, and the longest transmission distance can reach 6.5km.

Options:

A.

True

B.

False

Buy Now
Questions 6

When locating ADSL faults, what reasons may cause ADSL Modem to fail to activate?

Options:

A.

Board failure or port failure

B.

Line problem, or MODEM failure

C.

Line activation template configuration error

D.

All of the above are possible

Buy Now
Questions 7

Is the following description correct? The link layer defines electrical and mechanical processes and functions to activate, maintain, and remove lines when the systems at both ends are connected.

Options:

A.

True

B.

False

Buy Now
Questions 8

Which control frame messages are defined by MPCP?

Options:

A.

GATE

B.

REPORT

C.

REGISTER

D.

REGISTER ACK

Buy Now
Questions 9

In the H.248 protocol, how to apply for gateway registration?

Options:

A.

Send MOD_REQ from MG to MGC

B.

Send MOD_REQ from MGC to MG

C.

Send SVC_CHG_REQ from MG to MGC

D.

Send SVC_CHG_REQ from MGC to MG

Buy Now
Questions 10

Which of the following statements about 802.1Q is incorrect?

Options:

A.

The value of TPID in the 802.1Q Ethernet frame structure is 8100

B.

Theoretically, the value range of VLAN ID is 0~4095

C.

There are only 4 VLAN priorities in the 802.1Q Ethernet frame structure

D.

802.1Q Ethernet frame is 4 bytes more than ordinary Ethernet frame

Buy Now
Questions 11

What are the categories of acceptance test items in the MA5600T/MA5680T acceptance test manual?

Options:

A.

Basic package

B.

Premium package

C.

Expansion Pack A

D.

Expansion Pack B

Buy Now
Questions 12

Is the following description correct? In the EPON network, the gemport is used to carry the service flow.

Options:

A.

True

B.

False

Buy Now
Questions 13

In SNMP V1, which of the following messages is a communication message between NMS and Agent?

Options:

A.

GetRequest

B.

PutRequest

C.

SetRequest

D.

GetResponse

Buy Now
Questions 14

Regarding MA5600 Super Vlan and Sub Vlan, which of the following descriptions are correct?

Options:

A.

Super VLAN is different from VLAN in the usual sense. It is just a Layer 3 interface and does not contain physical ports.

B.

Super VLAN is mainly used to save IP addresses

C.

Sub VLAN only contains physical ports, and a three-layer VLAN virtual interface can be established.

D.

Sub VLAN types can be: Smart VLAN, MUX VLAN, Standard VLAN.

Buy Now
Questions 15

Is the following description correct? The computer in the local area network judges whether the received broadcast frame is what it should receive is to judge the source of the frameMACIs the address the same as the hardware address of the machine .

Options:

A.

True

B.

False

Buy Now
Questions 16

Is the following description correct? The process of voice fault location can generally be divided into: troubleshooting the external device fault, locating the fault to the specific device, and locating the fault to the board.

Options:

A.

True

B.

False

Buy Now
Questions 17

Which of the following commands is used to close the main server of Sybase System?

Options:

A.

shutdown SYS_MAIN

B.

shutdown SYS

C.

shutdown

D.

Shutdown

Buy Now
Questions 18

What are the bandwidth types of DBA in GPON network?

Options:

A.

Fix

B.

Max

C.

Assure

D.

Non-assure

Buy Now
Questions 19

How many message commands does H.248 protocol have in total?

Options:

A.

5

B.

8

C.

9

D.

13

Buy Now
Questions 20

MA5600T/MA5680T What is the command to query GPON working mode?

Options:

A.

#display xpon mode

B.

(diagnose)%%display xpon mode

C.

#(config)display xpon mode

D.

All of the above

Buy Now
Questions 21

Is the following description correct? In the GPON network, in order to avoid data conflicts and improve network utilization efficiency, the downstream direction adopts TDMA multiple access mode and arbitrates the data transmission of each ONU.

Options:

A.

True

B.

False

Buy Now
Questions 22

In the EPON network, what is the upstream and downstream bandwidth of the PON port?

Options:

A.

1Gbps/1Gbps

B.

1.25Gpbs/1.25Gpbs

C.

1.25bps/2.5Gbps

D.

1Gbps/2Gbps

Buy Now
Questions 23

In the GPON system, what bandwidth types does type1 in the Tcont type include?

Options:

A.

Fixed bandwidth

B.

Guaranteed bandwidth

C.

Best effort

D.

Non-guaranteed bandwidth

Buy Now
Questions 24

The router mainly works inOSIWhich layer in the model?

Options:

A.

Physical layer

B.

Link layer

C.

Network layer

D.

Transport layer

Buy Now
Questions 25

After installing the sybase patch, which of the following commands can display the version information of the installed sybase patch?

Options:

A.

1>select @@version2>go

B.

1>select @@patch2>go

C.

1>version_help2>go

D.

1>ver_help2>go

Buy Now
Questions 26

What are the alarm levels of U2000?

Options:

A.

Fatal

B.

Urgent

C.

Important

D.

Secondary

Buy Now
Questions 27

Is the following description correct? When classifying the acceptance test items, the basic package is used to ensure the normal operation of the basic services and functions of the equipment and the network, and only simple or cheap instruments are needed to satisfy the acceptance test items.

Options:

A.

True

B.

False

Buy Now
Questions 28

The international professional organization responsible for allocating IP addresses has divided several network segments as private network segments, which can be freely distributed and used by people on private networks. Which of the following is not a network segment of private addresses?

Options:

A.

10.0.0.0/8

B.

172.16.0.0/16

C.

192.168.0.0/16

D.

224.0.0.0/8

Buy Now
Questions 29

What are the queue scheduling methods supported by MA5600?

Options:

A.

FIFO

B.

PQ

C.

CQ

D.

WRR

Buy Now
Questions 30

What is the correct correspondence between IP address and MAC address in a broadcast domain?

Options:

A.

One IP address can correspond to multiple MAC addresses

B.

One MAC address can only correspond to one IP address

C.

One MAC address can correspond to multiple IP addresses

D.

None of the above

Buy Now
Questions 31

Is the following description correct? The VPI/VCI of the ATM cell has only local importance, and the VPI/VCI value of each node in the transmission process can be changed.

Options:

A.

True

B.

False

Buy Now
Questions 32

Is the following description correct? In PON networks, multimode optical fibers are often used.

Options:

A.

True

B.

False

Buy Now
Questions 33

Is the following description correct? The cells transmitted in the ATM network have two priority levels, which are distinguished by the CLP bit in the cell header. CLP=1 means high priority, and CLP=0 means low priority.

Options:

A.

True

B.

False

Buy Now
Questions 34

According to the IEEE 802.1Q standard, where is the VLAN identification field in the Ethernet frame?

Options:

A.

Before source MAC address and destination MAC address

B.

Between the source MAC address and the destination MAC address

C.

After the source MAC address and destination MAC address

D.

Not fixed

Buy Now
Questions 35

In the 802.1Q tag header, how many digits is the VLAN ID field, and how many VLANs can be specified in total?

Options:

A.

4;16

B.

8;256

C.

10;1024

D.

12;4096

Buy Now
Questions 36

Which of the following methods can be used for the reset test of the MA5600T/MA5680T single board?

Options:

A.

Hot-swappable the board, check whether the board can be restored to normal after reset

B.

Press the RESET button on the handle bar of the main control board to forcibly reset the main control board. Observe whether the main control board can return to normal after resetting.

C.

Use the command board reset to reset the service board. Check whether the service board can be restored to normal after resetting.

D.

All of the above

Buy Now
Questions 37

Which of the following does not belong to the category of communication networks?

Options:

A.

Telephone network

B.

InternetThe internet

C.

Radio and Television Network

D.

State Grid

Buy Now
Questions 38

In UA5000, which of the following boards can provide 32 ADSL2+ interfaces and 32 POTS interfaces at the same time?

Options:

A.

A32

B.

ADRB

C.

CSRB

D.

ADRI

Buy Now
Questions 39

Which of the following descriptions of MUX vlan characteristics is correct?

Options:

A.

There are two types of ports: uplink port and service virtual port

B.

A MUX VLAN can contain multiple uplink ports and multiple service virtual ports

C.

Layer 2 interworking between different MUX VLANs

D.

MUX VLAN is mainly used for community access.

Buy Now
Questions 40

Is the following description correct? The DC upgrade tool requires the support of a license. Without a license, 30 units can be concurrently concurrent by default, and a maximum of 60 units can be concurrent with a license.

Options:

A.

True

B.

False

Buy Now
Questions 41

In the UA5000 system, which command can be used to view the progress during data backup and loading?

Options:

A.

display progress

B.

display backup

C.

display load

D.

display tftp

Buy Now
Questions 42

When the MA5600T/MA5603T equipment needs to be maintained and managed locally, the baud rate setting of the maintenance terminal's hyperterminal must be consistent with the serial port baud rate parameters of the MA5600T/MA5603T system. What is the system default serial port baud rate?

Options:

A.

9600bit/s

B.

19200bit/s

C.

38400bit/s

D.

115200bit/s

Buy Now
Questions 43

Which of the following UA5000 boards can support ADSL services?

Options:

A.

VDMB

B.

CSRB

C.

SDLE

D.

A32

Buy Now
Questions 44

What is the smallest constituent unit in the message constituent mechanism of the H248 protocol?

Options:

A.

message

B.

transaction

C.

Associated context

D.

command

Buy Now
Exam Code: H35-210_V2.5
Exam Name: HCIA-Access V2.5 Exam
Last Update: May 3, 2024
Questions: 299

PDF + Testing Engine

$56  $159.99

Testing Engine

$42  $119.99
buy now H35-210_V2.5 testing engine

PDF (Q&A)

$35  $99.99
buy now H35-210_V2.5 pdf
dumpsmate guaranteed to pass
24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 04 May 2024