HPE2-T37 Using HPE OneView Questions and Answers

nPartition configuration.

BMC settings.

Complex firmware baseline.

Ethernet connections.

21

1

3

5

SCP

HTTPS

SFTP

HTTP

FTP

HPE Remote Support

Active Directory integration

Security mode

Trap destination to HPE OneView

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.

M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.

sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.

M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.

Shrinking a volume

Volume conversion

Remote replication

Growing a volume

Fabric manager

Logical interconnect group

Logical enclosure

Enclosure group

It is an application that can be installed on Windows or Linux system that will provide automated discovery of HPE OneView instances

It is a plugin to HPE Oneview that will allow integration of HPE oneView with VMware management and monitoring components

It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers

It is a plugin to vCenter Server that will allow management of the components added to HPE Oneview from vCenter server interface

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster

HPE OneView has a built-in HA feature that can be activated with an additional license

HPE OneView availability relies on HA features provoed by the hypervisor

During hpe oneView deployment customer may select configure proprietary HA mode.

IPMI credentials are configured for the iLO

REST API plugin is enabled for iLO

Active Directory configuration is performed on iLO

SSO certificate is added to the iLO

State of the SAN connections in the server profile.

FC network definition and association with fabrics from SAN manager.

Consistency checking level for SAN storage in the server profile.

Proper array and storage pools licensing in HPE OneView.

iSCSI

RoCE

FC

Ethernet

The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.

The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.

Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.

Ensure that the Link Aggregation Group time-out value matches the server set values.

Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems

Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination

The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

It supports HPE OneView instances from version 8.40 or newer.

It can be used tree of charge for the HPE Synergy platform because the licenses are included.

It is available for customers that have more than three HPE Synergy Frames.

It supports HPE ProLiant G6 and newer systems regardless of the OS installed.

A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers

An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section

An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring

HPE Superdome Flex 280

HPE Synergy Virtual Connect SE 32Gb FC Module

HPE Synergy 480 Compute Modules

HPE B-series SN6600B Fibre Channel Switch

HPE MSA 2062 Storage Array

HPE Virtual Connect modules

HPE Apollo XL 170r

Brocade and Cisco SAN Manager

HPE Primera and HPE 3PAR

Define the switches as unmanaged devices manually.

Start hardware discovery to add the Aruba switches.

Add the Aruba switches as managed devices in HPE OneVlew.

Add the Aruba switches as monitored devices in HPE OneView

As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.

If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.

As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

Logical Enclosure

Logical Interconnect Group

Logical Interconnect

Server Profile

HPE ProLiant G6 and newer systems.

HPE Synergy compute nodes Gen10 or later.

HPE ProLiant Gen10 and newer systems

HPE superdome Flex and Superdome Flex 280

During backup restore, users with Administrator privileges can still login to HPE OneView

An HPE OneView backup can be used to restore individual components like server profile

Users with Backup Administrator privileges can restore an HPE OneView backup

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.

Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.

HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.

HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.

Fibre Channel connections can be defined

UEFI optimized is the only available boot mode

Virtual WWNs and MAC addresses can be defined

Enclosure Group Is automatically selected

It has Quality of Service enabled by default.

It is always configured as a private network.

It must be a tagged network.

It has smart link enabled at all times.

Storage pools in discovered state can be removed from HPE OneView.

HPE OneView can be used to configure replication only between managed storage pools

All storage pools from the system named ThreePAR-1 can be used for volume provisioning

All storage pools in managed state have a valid HPE OneView license applied