JN0-104 Questions and Answers

ping do-not-fragment

ping rapid

ping verbose

ping size

/19

/18

/20

/17

operator

authorized

read-write

super-user

Login class permissions can be overridden for certain commands.

Users can be members of multiple login classes.

Login classes define access privileges for a user.

There are no system-defined login classes.

It will generate support information for JTAC.

It will save a copy of the configuration so that you can go back to it at any time

It will prevent 2 commit from happening

It will restore your system to factory default settings.

It can be used for Layer 3 VPN implementations.

It can be used to create a separate routing table.

An interface in the routing instance can also reside in the default routing instance.

It automatically has import and export policies applied.

OFTP

TFTP

SCP

SNMP

You must use the dat 100.0.0.2 match condition instead of the src 100.0.0.2 match condition.

You must add the size parameter to the command.

Traffic destined for 100.0.0.2 is transit traffic.

You must add the layer2-headers parameter to the command.

The ge-0/0/0 interface is administratively down.

The ge-0/0/0 interface has flow control disabled.

The ge-0/0/0 interface's physical link is down.

The ge-0/0/0 interface has the link-mode set to half-duplex.

CoS can increase the performance of a slow network.

CoS can manage traffic congestion

CoS can prioritize latency-sensitive traffic

CoS can increase network bandwidth.

vSRX

vIDP

vPTX

vMx

The command provides a list of installed hardware components, including serial numbers and model numbers.

The command provides a list of all current hardware utilization statistics and operational status

The command provides 2 list of supported hardware components and their current operating status

The command provides a list of supported hardware components and environmental thresholds.

The PFE will route or switch packets or frames out of the correct interface as quickly as possible.

The PFE will apply filters and routing policies when forwarding the packets to their final destination.

A The PFE will process management traffic to help monitor and manage the network device.

A The PFE will calculate the best network path to each individual subnet based on input from various routing protocols and static routes.

user@router> monitor traffic extensive

user@router> monitor interface traffic

user@router> show interface detail

user@router> show interface terse

All other traffic from the Web destined to 172.19.20.50 is accepted.

All other traffic from the Web destined to 172.19.20.50 is discarded

The HTTP traffic destined to 172.19.20.50 is accepted.

The HTTP traffic from source 172.19.20.50 is accepted.

commit at

commit confirmed

commit check

commit

A PFE receives microcode updates from the RE.

A PFE receives layer 4 forwarding tables updates from the RE.

A PFE receives hardware status messages from the RE

A PFE receives environmental status messages from RE.

It will be sent to the default BGP policy

It wall match term-1 and be accepted.

It wall match term-2 and be accepted

It will match term-2 and be rejected.