Labour Day - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpm65

NCM-MCI-5.20 Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20 Questions and Answers

Questions 4

An administrator manages the following two Nutanix AOS 5.15 cluster environment:

• Corp-cluster-01

• Corp-cluster-02

The VM images must be available only on Corp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.

Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)

Options:

A.

Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster

B.

Set the policy enforcement to Soft.

C.

Set the policy enforcement to Hard.

D.

Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.

Buy Now
Questions 5

An administrator reviews the error in the exhibit, the examines the state of the cluster, the administrator finds that the AHV host is up and Functional , but the cluster capacity is low.

What will happen to the VMs on the host with this controller VM?

Options:

A.

They will remain on the current host

B.

they will reboot onto other nodes in the cluster

C.

the will shutdown and be orphaned on the host

D.

they will be shutdown unless protected by a Protection Policy

Buy Now
Questions 6

A CEO asks the IT administrator to provide a list of required resources to protect current workloads and the two new SQL servers from a disaster. The Nutanix environment is managed by Prism Central.

Which option explains how to meet the CEO's request?

Options:

A.

In Capacity Runway, select Optimize Resources and select all VMs that must be protected.

B.

Create a new project and assign the VMs to it to get compute and storage requirements.

C.

Create a new scenario based on a new cluster based on a VM Profile and select Recommend.

D.

Create a new Recovery policy by selecting the VM that needs to be protected and get hardware requirements.

Buy Now
Questions 7

Refer to the exhibit.

NCM-MCI-5.20 Question 7

An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)

Options:

A.

Workloads are multi-threaded.

B.

VMs have one vCPU configured.

C.

VMs have multi-queue disabled.

D.

VMs have more than one vCPU.

Buy Now
Questions 8

In a Nutanix cluster, a Protection Domain contains 50 entities that are replicated to a remote Single Node Replication Target.

The current schedule configuration is as follows:

• Repeat every 6 hours

• Local Retention Policy 1

• Remote Retention Policy 8

• Starting time 12 am

At 8 am on Monday, the administrator discovers that a protected VM is corrupted. The latest good state was Sunday 2 pm. The administrator needs to maintain current protection.

Which strategy should the administrator use to meet these requirements?

Options:

A.

From the Remote site, activate the Protection Domain, then re-protect the entity.

B.

From the Remote site, restore the VM from the local snapshot by selecting the correct snapshot

C.

From the local site, retrieve the correct remote snapshot, then restore the VM locally.

D.

From the local site, restore the VM from the local snapshot by selecting the correct snapshot.

Buy Now
Questions 9

Which Windows technology does AHV support to prevent authentication theft?

Options:

A.

Endpoint Manager

B.

Azure AD Multi-Factor

C.

Windows Defender Credential Guard

D.

Active Directory federation Services

Buy Now
Questions 10

Nutanix Support Asked an administrator to provide AHV logs to help solve a support request.

Which task should be performed to provide log files to the support team?

Options:

A.

Run NCC Check from the command line

B.

Upload log files from /home/nutanix/data/logs folder

C.

collect logs from the health Page

D.

Enable Pulse to include additional support information

Buy Now
Questions 11

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.

What occurs to the cluster and these VMs during an AHV upgrade?

Options:

A.

One VM out of the four powers down when the node hosting it reboots.

B.

One node hosts two VMs while the node being upgraded is in maintenance mode.

C.

The AHV pre-upgrade checks fail until the four VMs are powered off.

D.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

Buy Now
Questions 12

A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.

Which Nutanix technology will provide the shortest RPO possible?

Options:

A.

NearSync

B.

Leap

C.

Metro Availability

D.

Asyn&DR

Buy Now
Questions 13

When Does AOS automatically Generate a case with nutanix Support?

Options:

A.

When disk space usage is high above 90%

B.

On failure of a scheduled NCC check

C.

When losing network connectivity to the CVM

D.

For every alert detected by pulse Diagnostics

Buy Now
Questions 14

An administrator needs to install prism central for their 2550 multi-cluster environment.

How should they deploy the application?

Options:

A.

Deploy a large 3-VM Prism Central instance

B.

Deploy a large 1-VM Prism Central instance.

C.

Deploy a small 3-VM Prism Central instance.

D.

Deploy a small 1-VM Prism Central instance.

Buy Now
Questions 15

A new Nutanix cluster is ready for production on a remote site with no IT staff. Changes to the infrastructure will cost money and probably cause a cluster stop. The administrator needs to perform a health check on the environment that should include:

• Network connectivity checks

• Network performance status

• Storage performance status

Which tool should be used to perform this test?

Options:

A.

X-Ray

B.

clurator_cli

C.

NCC

D.

diagnostic, py

Buy Now
Questions 16

An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:

NCM-MCI-5.20 Question 16

Which action should the administrator take to improve network performance?

Options:

A.

Configure VLAN tagging both on br0 and br1 and their physical interfaces.

B.

Add eth0 and eth1 to the br0-up bond

C.

Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows

D.

Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.

Buy Now
Questions 17

An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed. The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.

What should the administrator do to meet the requirement?

Options:

A.

Disable the vNIC on the affected VM

B.

Quarantine the VM using the Forensic Method

C.

Create a firewall rule that blocks VM traffic but permits diagnostic access

D.

Create a security policy with a service chain directing that VMs traffic to the firewall VM

Buy Now
Questions 18

A systems administrator configures a protection domain replication between two Nutanix clusters. After the first successful replication, the administrator tests DR by clicking activate on the remote cluster.

While VMs are active on the remote cluster, the protection domain is marked as active on both clusters.

What steps are required to return both clusters to their original state?

Options:

A.

1. On the remote site, deactivate the Protection Domain using ncli

2. On the primary site, select the Protection Domain and dick migrate

B.

1. On the remote site, promote the Protection Domain

2. On the primary site, change the Protection Domain state from Decoupled to Disabled

3 Enable the original primary site as remote site

C.

1. On the prima7 site, suspend replications

2. On the remote site, deactivate the Protection Domain using ncli

3. On the remote site, migrate the protection domain back to the primary site

D.

1 On the remote site, restore the snapshots from the Protection Domain

2. On the remote site, select the Protection Domain and migrate to the primary site

Buy Now
Questions 19

What is required to successfully live migrate a VM Between two AHV clusters?

Options:

A.

Stretch L2 networks across the primary and recovery sites

B.

Configure a Protection domain with synchronous replication

C.

Install and Configure the witness VM on a third Site.

D.

Both clusters must be managed by the same prism central

Buy Now
Questions 20

An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.

The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.

Which situation is causing this condition?

Options:

A.

The VM's iSCSI traffic is being routed to the data services IP subnet

B.

The performance test is generating small block random 10.

C.

The duster data services IP address is a bottleneck, shared with other iSCSI traffic

D.

Data Locality ensures that VM attached disks are always faster than iSCSI volumes.

Buy Now
Questions 21

An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.

Which action should the administrator perform?

Options:

A.

Use Cross Hypervisor DR to replicate VMs from ESXi to AHV

B.

Use VMware Converter

C.

Use Nutanix one-click cluster conversion from ESXi to AHV

D.

Use storage live migration

Buy Now
Questions 22

An administrator needs to replace an aging SAN and move to a hyper-converged infrastructure. The existing environment consists of the following hosts that are connected to the SAN:

• 5xAIX hosts

• 3x Hyper-V hosts

• 9xESXi hosts

• 2x physical SQL Clusters (Windows Server 2012R2 hosts)

After deploying a Nutanix AHV cluster, which two actions should the administrator take to meet the requirements? (Choose two.)

Options:

A.

Deploy Volumes to support the AIX and SQL workloads.

B.

Migrate the ESXI workloads to AHV using Move.

C.

Deploy Files to support the AIX hosts.

D.

Migrate the ESXi and Hyper-V workloads using Move.

Buy Now
Questions 23

Refer to the exhibit.

NCM-MCI-5.20 Question 23

An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.

What configuration change should be made to fix this issue?

Options:

A.

Change leaps to https

B.

Change the Directory URL to use an IP rather than a name

C.

Change the plct from 389 to 636

D Change the Domain to use an IP rather than a name

Buy Now
Questions 24

An administrator has Created a new windows VM and Given it to the user. The user states that only C drive mapping is visible within the windows OS.

What is causing this issue?

Options:

A.

The user has not formatted and assigned drive letters to the additional disk.

B.

The additional disk have not been formatted as ExFAT in Prism Central

C.

the administrator has not run the add command line utility

D.

the additional disk were formatted as NTFS in Prism Central

Buy Now
Questions 25

An administrator has two clusters: Site A and Site B.

Async DR is configured between the clusters as follows:

• Site A is the Primary Site

• Site B is the Secondary inactive Site, no VMs running

• Site A is fully in Production

• Site B used as Backup/Disaster Recovery

The customer wants to perform a planned failover between the sites.

How should the administrator accomplish this?

Options:

A.

Click Activate on the Secondary site within the Data Protection Dashboard

B.

Click Activate on the Secondary site and run deactive NCLI command on Primary site

C.

Choose Migrate on the Secondary site within the Data Protection Dashboard

D.

Choose Migrate on the Primary site within the Data Protection Dashboard

Buy Now
Exam Code: NCM-MCI-5.20
Exam Name: Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20
Last Update: May 4, 2024
Questions: 167

PDF + Testing Engine

$56  $159.99

Testing Engine

$42  $119.99
buy now NCM-MCI-5.20 testing engine

PDF (Q&A)

$35  $99.99
buy now NCM-MCI-5.20 pdf
dumpsmate guaranteed to pass
24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 06 May 2024