Independence Day Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpm65

NS0-527 Questions and Answers

Question # 4

Click the Exhibit button.

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window.

Referring to the exhibit, which step should be performed next to test the recovery workflow?

A.

Delete the SVM-DR relationship.

B.

Pause any ongoing transfers.

C.

Abort any ongoing transfers.

D.

Update any ongoing transfers.

Full Access
Question # 5

When installing a new AFF A700s, you notice thatthe HA interconnect adapters use miniSAS HD. You subsequently consult Hardware Universe to find out that only 0.5M cables are supported. Due to the importance of the system data fields that use this link, you delay the installation until you can acquire 0.5M cables.

In this scenario, which two system data fields are communicated between HA pairs over the interconnect adapters? (Choose two.)

A.

NVRAM mirroring

B.

heartbeat signal

C.

intercluster peering

D.

data LIF location

Full Access
Question # 6

What are three methods of configuring SnapMirror replication relationships? (Choose three.)

A.

Use Active IQ.

B.

Use the ONTAP command line.

C.

Use OnCommand Insight.

D.

Use ONTAP System Manager.

E.

Use Active IQ Unified Manager.

Full Access
Question # 7

A client has two regional offices that use SnapMirror cross-site replication to host disaster-recovery mirrors for both offices. Aco-worker at one office is requesting read/write access to one of the volume mirrors. You must accomplish this task without interrupting data access or replication.

In this scenario. how should you proceed?

A.

Create a FlexVol volume on the destination cluster so that it is writeable for the co-worker.

B.

Create a FlexClone volume based on one of the Snapshot copies at the destination so that it is writeable for the co-worker.

C.

Break the SnapMirror relationship between the local and remote clusters, andmake the destination volume writeable for the co-worker.

D.

Modify the export policy on the destination mirror volume so that it is now writeable for the co-worker.

Full Access
Question # 8

A customer has a MetroCluster configuration and wants to automate the disaster recovery process for unplanned automatic switchover.

Which NetApp tool would accomplish this task?

A.

ONTAP System Manager

B.

SnapCenter

C.

ONTAP Mediator

D.

Active IQ Unified Manager

Full Access
Question # 9

Click the Exhibit button.

Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)

A.

SnapCenter Application Plugin

B.

SnapCenter Host Plugin

C.

Browser

D.

Host OS (OS)

Full Access
Question # 10

Exhibit:

You are configuring a SnapMirror relationship to capture all daily activities and archive them. Information about the environment is shown in the exhibit.

In this scenario, how much data must be transferred during the scheduled SnapMirror update?

A.

50 GB

B.

250 GB

C.

200 GB

D.

150 GB

Full Access
Question # 11

Which two statements are correct about configuring a peering connection between clusters? (Choose two.)

A.

The LIFs should be on the same subnet.

B.

You must use at least one intercluster LIF per node.

C.

You must use one cluster LIF per node per network.

D.

The intercluster LIFs must have full connectivity to each other.

Full Access
Question # 12

You need to backup Exchange, MS SQL, and VMware virtual machines with application consistency.

Which tool accomplishes this task?

A.

OnCommand System Manager

B.

VMware vSphere Web client

C.

SnapCenter

D.

OnCommand Unified Manager

Full Access
Question # 13

You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.

In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?

A.

Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.

B.

Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.

C.

Expand the source FlexGroup nondisruptively, and update the SnapMirror.

D.

Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.

Full Access
Question # 14

Your disaster recovery strategy requires a mirror, an archive, and a tape backup. Which software would you recommend for this scenario?

A.

OnCommand System Manager

B.

OnCommand Workflow Automation

C.

SnapProtect

D.

OnCommand Unified Manager

Full Access
Question # 15

A customer has application data corruption on a LUN that is in a volumewith six other data LUNs. The customer needs to restore the corrupted LUN from a Snapshot copy without affecting the other six LUNs.

Which process would accomplish this task?

A.

Use volume SnapRestore.

B.

Use LUN mapping.

C.

Use the volume Snapshot partial-restore file.

D.

Use a single-file restore.

Full Access
Question # 16

You have deployed IntelliSnap to list NetApp Snapshot copies in volumes on your ONTAP system, schedule new backups on unprotected volumes, and implement archiving to your remote AltaVault system.

Which additional NetApp product does IntelliSnap require to perform all of these actions?

A.

OnCommand Insight

B.

OnCommand Unified Manager

C.

OnCommand System Manager

D.

OnCommand Performance Manager

Full Access
Question # 17

You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use?

A.

Transition Advisor

B.

Visualization

C.

Upgrade Advisor

D.

Event Viewer

Full Access
Question # 18

You are creating a SnapVault relationship and have concerns about the available capacity on the destination.

In this scenario, which three factors must you consider when you size the destination volume? (Choose three.)

A.

the autogrowsettings on the source volume

B.

the size of the source volume

C.

the number of Snapshot copies to retain on the destination

D.

the rate of data increase on the source

E.

the number of Snapshot copies to retain on the source

Full Access
Question # 19

A customer’s infrastructure consists of multiple ONTAP clusters, both physical and virtual. The clusters replicate some data with each other. You want to generate a comprehensive report of all the replication that is present on the infrastructure.

In this scenario, which tool accomplishes this task?

A.

OnCommand System Manager

B.

Storage Replication Adapter

C.

OnCommand Unified Manager

D.

OnCommand Workflow Automation

Full Access
Question # 20

An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

A.

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3

B.

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3

C.

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3

D.

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3

Full Access
Question # 21

Click the Exhibit button.

An AFF A700 administrator is told that the VMwareenvironment will be upgraded to vSphere 7 and it will continue to use NFSv3 for their datastores.

Referring to the exhibit, which version of SnapCenter Hypervisor Plugin and SnapCenter Server should they use?

A.

SnapCenter Plug-in 4.2.1 and SnapCenter Server 4.2.1

B.

SnapCenter Plug-in 4.3.1 and SnapCenter Server 4.3.1

C.

SnapCenter Plug-in 4.3 and SnapCenter Server 4.1

D.

SnapCenter Plug-in 4.3 and SnapCenter Server 4.3

Full Access
Question # 22

A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.

In this scenario, how much data is transferred when the SnapMirror relationship is initialized?

A.

100 TB

B.

200 TB

C.

10 TB

D.

90 TB

Full Access
Question # 23

Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.

In this scenario, what must the customer do tocreate the SnapMirror relationship?

A.

The customer can create a DP type SnapMirror relationship without needing to perform an upgrade.

B.

The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP 9.1 and then createthe XDP SnapMirror relationship.

C.

The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP 8.3 and then create the XDP SnapMirror relationship.

D.

The customer can create a XDP type SnapMirror relationship withoutneeding to perform an upgrade.

Full Access
dumpsmate guaranteed to pass
24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 06 Jul 2022