Grab 75% Off This Black Friday: Use coupon code below to save on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: 75only

NS0-094 NetApp Hardware Support Engineer Professional Exam Questions and Answers

Questions 4

Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)

Options:

A.

wafiron show < aggregate >

B.

node run –node < node > sysconfig –r

C.

storage aggregate show

D.

node run –node < node > sysconfig –a

Buy Now
Questions 5

Which two statements are true about an IOM 12 module? (Choose two.)

Options:

A.

It has two SAS ports.

B.

It has four SAS ports.

C.

It does not have an Ethernet port for alternate control path (ACP).

D.

It has an Ethernet port for alternate control path (ACP).

Buy Now
Questions 6

In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.)

Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):Qlogic FC 16G adapter in slot 1 on Controller

Options:

A.

HA-RASTRACE.TGZ

B.

ALL-COREDUMP.XML

C.

SSRAM-LOG

D.

PCI-HIERARCHY.XML

Buy Now
Questions 7

An aggregate has experienced a multiple disk failure due to a failing I/O module (IOM). The module has been replaced and the aggregate is still failed.

What step can be taken to recover the aggregate?

Options:

A.

Use diskcopy from maintenance mode.

B.

Run wafliron from the boot_menu.

C.

Unfail the drives from maintenance mode.

D.

Unfail the drives in the order that they failed from the clustershell

Buy Now
Questions 8

Which two steps are required to replace a drawer in a DS460c shelf? (Choose two.)

Options:

A.

Shut down both nodes.

B.

Disconnect the cable chains from the chassis.

C.

Power off the shelf.

D.

Evacuate all drives in the drawer.

Buy Now
Questions 9

In maintenance mode, which of the following commands shows disk ownership?

Options:

A.

sysconfig –v

B.

disk show –v

C.

aggr status

D.

storage show disk –p

Buy Now
Questions 10

A 4-node NetApp ONTAP cluster sent an alert that one of the cluster interconnect switches has failed. After replacement, the system administrator notices that half of the cluster LIFs are not on their home ports.

Which parameter must the system administrator enable to automatically migrate the cluster LIFs?

Options:

A.

failover-policy

B.

auto-revert

C.

allow-lb-migrate

D.

home-port

Buy Now
Questions 11

After you configure a new interface group with ports e2a and e2b, the ports are showing as down in the interface group.

NS0-094 Question 11

Which two actions correct the issue? (Choose two.)

Options:

A.

Verify the switch side LACP configuration.

B.

Add the ports e2a and e2b to broadcast domain bd_data1.

C.

Modify ports e2a and e2b to -autonegotiate-admin false -speed-admin 40000.

D.

Ensure that the switch ports are correctly cabled.

Buy Now
Questions 12

A node has failed.

Which two conditions must be met for an automatic takeover to be triggered? (Choose two.)

Options:

A.

The combined utilization of both nodes must be less than 100%.

B.

The cluster network must be available.

C.

Mailbox disks must be reachable.

D.

NVRAM must be synchronized.

Buy Now
Questions 13

You receive the following AutoSupport message:

[Node-01: cshmd: hm.alert.raised:alert]:

Alert Id = ClusterSwitchConnectivity_Alert

Alerting Resource = Node-02

raised by monitor ethernet-switch

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

When researching, you discover the following output:

Exhibit 2 — Network Port Health

Cluster::* > network port show

-health-status degraded

-fields health-degraded-reasons

node port health-degraded-reasons

-------- ---- -----------------------

Node-02 e0a link_flapping

What action do you take to resolve this issue?

Options:

A.

Replace the SFP on port e0a on node-02.

B.

Update the RCF file on the cluster switches.

C.

Update the firmware on the cluster switches.

D.

Replace the SFP on port e0a on node-01.

Buy Now
Questions 14

In the latest MANAGEMENT LOG AutoSupport message, you try to inspect the ENVIRONMENT section but find it empty.

In which section of AutoSupport can you find the reason?

Options:

A.

AUTOSUPPORT-BUDGET.XML

B.

HEADERS

C.

AUTOSUPPORT-HISTORY.XML

D.

MANIFEST.XML

Buy Now
Questions 15

You are upgrading your 6-node NetApp ONTAP cluster from ONTAP 9.9.1 to 9.16.1. As part of the ONTAP software upgrade process, you need to update the cluster switches. After you update the first switch, you receive the following AutoSupport message:

Exhibit — AutoSupport Alert

vifmgr: callhome.clus.net.degraded:alert:

Call home for CLUSTER NETWORK DEGRADED:

Large MTU Packet Loss - Ping failures detected

between Node1_clus1 (169.254.2.94) on Node1

and Node2_clus2 (169.254.248.67) on Node2.

All cluster ports and interfaces are in an up/up status.

What is causing this error?

Options:

A.

ONTAP software is not at the same version on all nodes.

B.

The RCF file has not been applied to all switches.

C.

The ONTAP software version is not compatible with some of the controllers.

D.

The cluster switches have different firmware versions.

Buy Now
Questions 16

Where is a kernel core file stored on a FAS9000 system that is running ONTAP 9.12.1 software?

Options:

A.

on the partner root aggregate

B.

on the root aggregate

C.

on the mailbox disk

D.

on the boot device

Buy Now
Questions 17

Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

Options:

A.

AFF C190

B.

FAS2750

C.

AFF A220

D.

FAS8200

Buy Now
Questions 18

Which statement best describes the functionality of RAID Error Propagation (REP)?

Options:

A.

An unrecoverable error on a user data block does not trigger a NetApp WAFL inconsistency.

B.

An unrecoverable error on a metadata block does not trigger a NetApp WAFL inconsistency.

C.

A recoverable error on a user data block triggers a NetApp WAFL inconsistency.

D.

An unrecoverable error on a user data block triggers a NetApp WAFL inconsistency.

Buy Now
Questions 19

After a panic, the customer asks you to explain the error “watchdog timeout.”

Which explanation would be appropriate?

Options:

A.

An optional software that monitors system performance.

An overloaded system fails to reset the watchdog and watchdog induces a system panic.

B.

An optional component included with Active IQ Unified Manager.

It notifies a user if watchdog fails to reach the storage system within a certain period.

C.

A service that detects and recovers from computer malfunctions.

A hardware or software error prevents update of watchdog and it induces a system panic.

D.

A service that monitors network activity and protects data.

A watchdog induces system panic to protect data if malicious activity is detected.

Buy Now
Questions 20

You notice the following system alert during a routine check of a four-node NetApp ONTAP cluster:

Alert ID: SwitchIfDead_Alert

Resource: Slot: 0 Port: 55 100G - Level

Severity: Major

Probable Cause:

The interface broadcomswitch-011/Slot: 0

Port: 55 100G - Level is up, but it is

not passing unicast traffic.

Possible Effect:

The lack of transmit or receive traffic

reported by the switch can indicate

issues with port-level or switch-level

data packet forwarding.

Corrective Actions:

1) Check interface counters and neighbor

discovery information to verify the

port's activity.

2) Check cluster and switch health status.

The customer confirms that the cables are connected correctly and interface LEDs on the switches are on.

What is the next step in troubleshooting this issue?

Options:

A.

Remove the cluster ports from the cluster IPspace and cluster broadcast domain, and delete the health alerts.

B.

Verify the configuration of the switchports with the output of RCF Configurator.

C.

Bounce the cluster interconnect ports on the ONTAP cluster nodes that are reporting this alert.

D.

Revert the ONTAP software upgrade to see if the alert disappears.

Buy Now
Questions 21

Which type of AutoSupport message would you expect to see triggered automatically when ONTAP software detects a NetApp WAFL inconsistency on an aggregate?

Options:

A.

MEDIUM ERROR DURING RECONSTRUCTION

B.

CHECKSUM ERROR

C.

WAFL INCONSISTENT USER DATA BLOCK

D.

WAFL INCONSISTENT BLOCK

Buy Now
Questions 22

Which two NetApp tools should be used when troubleshooting the root cause of an unexpected controller reboot? (Choose two.)

Options:

A.

Active IQ Unified Manager

B.

Active IQ Digital Advisor

C.

ONTAP CLI

D.

ONTAP Mediator

E.

Active IQ Config Advisor

Buy Now
Questions 23

You have a NetApp ONTAP cluster that is serving both SMB over 10Gbe and FC data. An application owner has started to complain about poor performance and asks you to research the issue. When looking through EMS messages, you see the following output:

NS0-094 Question 23

Which defective component triggers the EMS message?

Options:

A.

10Gbe module

B.

fiber cable

C.

32G FC module

D.

adapter card in slot 2

Buy Now
Questions 24

You are using wafliron on an aggregate named homedir on a production system.

When is the data on homedir available?

Options:

A.

when the administrator manually onlines the aggregate

B.

when wafliron is started

C.

after Phase 4 of wafliron is complete

D.

after the mounting phase of wafliron is complete

Buy Now
Exam Code: NS0-094
Exam Name: NetApp Hardware Support Engineer Professional Exam
Last Update: Nov 21, 2026
Questions: 81

PDF + Testing Engine

$42.5  $169.99

Testing Engine

$32.5  $129.99
buy now NS0-094 testing engine

PDF (Q&A)

$27.5  $109.99
buy now NS0-094 pdf
dumpsmate guaranteed to pass

24/7 Customer Support

DumpsMate's team of experts is always available to respond your queries on exam preparation. Get professional answers on any topic of the certification syllabus. Our experts will thoroughly satisfy you.

Site Secure

mcafee secure

TESTED 22 Nov 2026