HP HPE7-V01 Exam Dumps - Actual Questions Answers

The correct answer is D. The proposal contains too many HPE Composer2 appliances for the stated management requirement. HPE Synergy Composer provides the embedded HPE OneView management appliance function for Synergy. For high-availability management, HPE guidance requires Composers of the same type to be paired within the same management ring; the design does not require two Composer2 appliances in every frame simply because there are three frames. HPE documentation states that if redundancy is required, two Composers of the same type must be paired within the same management ring per HPE Synergy system. Option A is wrong because OneView Advanced licenses are not added separately for Virtual Connect modules or D3940 storage modules in the manner stated. Option B is wrong because the compute modules still require appropriate HPE OneView licensing. Option C is also wrong because WWN virtualization and profile mobility are delivered through HPE Virtual Connect and HPE OneView server profiles, not by simply adding standalone 32Gb FC switches. The key proposal correction is reducing the excessive Composer2 count while preserving redundant management. Reference/topics: HPE Synergy Composer2, logical enclosure management, HPE OneView, management redundancy, proposal validation.

The correct answers are B and C. In HPE Alletra 6000 / NimbleOS synchronous replication and Peer Persistence designs, the upstream and downstream volume relationship determines the active and standby host path behavior. HPE documentation states that when synchronous replication is configured, upstream and downstream volumes share the same serial number, and host paths are presented so that active paths are mapped to the upstream volume while standby paths are mapped to the downstream volume. That validates option B. Option C is also correct because in a bidirectional design, each array can host upstream volumes for some protected workloads and downstream volumes for others; the role is per replicated volume collection, not a permanent identity of the entire array. Options A and D are wrong because the witness is a separate arbitration component, not the upstream or downstream array. Option E is wrong because Alletra 6000 synchronous replication uses Ethernet connectivity between arrays, and Peer Persistence is not limited to FC-only host access. Reference/topics: HPE Alletra 6000 Peer Persistence, synchronous replication, upstream/downstream roles, witness design.

The correct answers are C and D. In a three-frame HPE Synergy logical enclosure using the primary/satellite fabric model, the HPE Virtual Connect SE 100Gb F32 modules act as the intelligent primary modules and HPE Synergy 50Gb Interconnect Link Modules extend connectivity into satellite frames. A pair of F32 modules with the required satellite link modules can satisfy the fabric requirement; therefore, the extra two F32 modules can be removed if the design still preserves redundancy and required 25/50Gb downlink connectivity. Option D is also correct because Fibre Channel uplink functionality on the HPE Virtual Connect SE 100Gb F32 module requires a Synergy 32Gb FC Upgrade license. This is necessary when using the Synergy fabric to provide FC access to HPE Alletra Storage MP B10000. Option B is false because the D3940 storage module still requires the appropriate SAS/RAID path for boot-device protection. Option E is wrong because the stated FT/vGPU requirement makes Standard licensing an unsafe substitution. Reference/topics: HPE Synergy primary/satellite fabric, VC SE 100Gb F32, FC upgrade licensing, D3940 boot design, VMware subscription validation.